StringFire

Free guitar plugins · by Niotik

Real amps. A real guitar. Free.

StringFire is two plugins for your DAW. The effect is an amp, cabinet, delay and reverb built on neural captures of real amplifiers. The instrument is an electric guitar made from 690 recordings of a real one. Together they are a whole guitarist and a whole rig.

WindowsVST3v0.9.4macOS coming soon

StringFire Guitar plugin window with a fretboardStringFire plugin window with pedal, amp, cabinet, delay and reverb

Plugin one · the effect

StringFire

Everything between your guitar and the record.

Pedal, amplifier, speaker cabinet, delay and reverb in one window. Put it on a guitar track, pick a rig and play. Every stage can be swapped or switched off, and the window resizes to fit your screen.

  • Neural captures of real amps and pedals
  • Measured cabinets, with delay and reverb after them
  • 23 finished rigs and your own presets
StringFire: pedal, amp and cabinet slots above level, delay and reverb controls
01

Amps that answer your hands

Every amp is a neural capture of a real amplifier. Play softly and it cleans up, dig in and it growls, the way the hardware does.

02

A pedal in front

A second capture slot holds an overdrive, distortion or fuzz pedal, with a boost between pedal and amp to push the amp harder.

03

Real speaker cabinets

Cabinet impulse responses measured from real cabinets and microphones give the amp its speaker, its mic and its air.

04

Delay and reverb built in

An echo with time, repeats and mix, and a reverb with decay and mix, placed after the cabinet where they belong.

05

23 rigs, ready to play

Complete pedal, amp and cabinet rigs from crystal clean to chainsaw metal, all matched in volume so you can flip through them.

06

Save your own sound

Store any setting as your own preset, load it in the next project, or send the small preset file to a friend.

The 23 factory rigs

  • Blues Sustain (Gary Moore style)
  • Thrash Rhythm (Metallica style)
  • Clean Sting (B.B. King style)
  • Major Stack (Blackmore style)
  • Neo-Classical Lead (Malmsteen style)
  • Liquid Lead (Satriani style)
  • Crystal Clean (Twin style)
  • Chime (AC15 style)
  • Funk Clean
  • Ambient Wash
  • Texas Blues (SRV style)
  • Edge of Breakup (Stones style)
  • Classic Rock Crunch (AC/DC style)
  • Brown Sound (Van Halen style)
  • Hard Rock Lead (Slash style)
  • Floating Lead (Gilmour style)
  • Grunge (Nirvana style)
  • Heavy Riff (Iommi style)
  • Stoner Fuzz (Orange style)
  • Mark Lead (Petrucci style)
  • Modern Metal (5150 style)
  • Tight Djent
  • Swedish Chainsaw (HM-2 style)
StringFire Guitar: a fretboard showing the played note above playing, vibrato and guitar controls

Plugin two · the instrument

StringFire Guitar

An electric guitar you play from the keyboard.

Play notes on a MIDI keyboard or draw them in the piano roll, and StringFire Guitar performs them the way a guitarist would: on real strings, with bends, slides and vibrato on the sounding string instead of a new note every time.

  • 690 recordings of a real guitar, five pickup positions
  • Lead mode and strummed chord mode
  • 16 playing styles, and your own presets
01

Every note is a recording

690 recordings of a real electric guitar: every fret of every string, on all five pickup positions. Nothing is synthesised.

02

It plays like a guitarist

Six strings, one note per string, and a fretting hand that stays in position. The fretboard shows where every note is played.

03

Bends, slides and hammer-ons

Overlap two keys and the string bends, slides or hammers on to the next note instead of starting a new one. You choose which.

04

Vibrato that arrives late

Depth, rate and delay, so a held note starts straight and then begins to sing, as it does under a player’s finger.

05

Chords that are strummed

Chord mode spreads the notes across the strings with real strum timing, from tight funk stabs to a slow ballad sweep. Palm mute included.

06

16 playing styles

Blues bends, singing leads, shred legato, slide guitar, country bends, power chords, metal chug and more, one click each.

The 16 playing styles

  • Blues Lead
  • Singing Lead
  • Shred Legato
  • Slide Lead
  • Power Chords
  • Open Chords
  • Slow Hand
  • Stinging Vibrato
  • Country Bends
  • Warm Neck Lead
  • Slide Guitar
  • Muted Picking
  • Metal Chug
  • Funk Chords
  • Ballad Chords
  • Jangle Chords
StringFire GuitarStringFire

Made for each other

StringFire Guitar puts out the dry signal that comes down the cable of a real guitar. Put StringFire after it on the same channel and that signal goes through a real pedal, a real amp and a real cabinet, exactly as it would on stage.

How it works

Why it sounds like the real thing

Because at every step it is the real thing, recorded or measured. StringFire does not guess what an amplifier does. It plays back what real ones did.

  1. Guitar
  2. Inputgain
  3. Gatesilence between notes
  4. Pedalneural capture
  5. Boostpush the amp
  6. Ampneural capture
  7. Cabinetimpulse response
  8. Delayecho
  9. Reverbspace
  10. Your mix
1

Captured, not imitated

A classic amp simulator is somebody’s model of how an amp should behave. A capture is a neural network trained on recordings of the real amp, at the real settings, so the breakup, the sag and the way it reacts to your picking come from the hardware itself.

2

A real speaker in a real room

Half of a guitar sound is the cabinet. StringFire uses impulse responses: measurements of a real cabinet through a real microphone, applied to the amp by convolution with no shortcuts.

3

Nothing lost on the way

Captures run at the 48 kHz they were trained at, whatever your project uses, with high-quality resampling around them. Level match keeps the volume steady when you switch amps, so you compare tone, not loudness.

The guitar works the same way

Most virtual guitars stretch a few samples across the neck or synthesise the string. StringFire Guitar has a separate recording for every fret of every string, and it keeps track of which string each note is on. So a bend bends that string, a slide travels along it, and a chord rings across six strings like a chord.

690
guitar recordings
6 × 23
strings and frets, each recorded
5
pickup positions
48 kHz
captures at their native rate

The price

Worth paying for. Free anyway.

Plugins that do what these two do usually cost real money. We added up what you would typically pay for each part, and then we crossed it out.

StringFire is free because we at Niotik value music. A good guitar sound should not depend on what is in your wallet, and we want everyone to be able to pick up this tool and make music that inspires someone else.

  • No trial period and no paid version
  • No account at Niotik, no ads, no tracking in the plugins
  • Open licence: GNU AGPLv3

Estimated value

  • Neural amp and pedal effecttwo capture slots, boost, gate, level match$129
  • Cabinet impulse response loaderwith 23 finished rigs$49
  • Delay and reverbbuilt into the same window$39
  • Sampled electric guitar instrument690 recordings, 16 playing styles$149

Comparable plugins$366

StringFire$0

Our own estimate, from the usual prices of comparable commercial plugins.

The sound library

The sounds come from their makers

The installer is small because the sound library is not inside it. A helper called Library Setup downloads every amp, cabinet and guitar recording to your computer, from the place its author published it.

  1. 1

    Open Library Setup

    The installer offers to start it, and it stays in the Start menu as “StringFire Library Setup”. Choose “Get everything”.

  2. 2

    Sign in to TONE3000 once

    The tool downloads the guitar recordings and the community captures by itself, then asks you to sign in to TONE3000. An account is free.

  3. 3

    Play

    The tool fetches the captures and cabinets the factory rigs use and shows which rigs are ready. Everything lands in Documents\StringFire.

What Library Setup brings

  • Guitar recordingsEGFxSet, CC BY 4.0431 MBDownloaded for you
  • Community amp capturesNAM_models collection, GPL-3.0259 capturesDownloaded for you
  • Factory rig amps, pedals and cabinetsCreators on TONE300036 filesOne sign-in, then automatic

Want more? StringFire loads any NAM capture (.nam) and any WAV impulse response. Download a pack you like, let Library Setup import the zip, or put the folder in Documents\StringFire\amps or cabs yourself, and it shows up in the plugin. What you download and how you use it is between you and its creator's licence.

Powered byTONE3000

The amp and pedal captures and the cabinet impulse responses in the factory rigs were made and shared by creators on TONE3000, the community library for guitar tones. Thank you to TONE3000 and to every creator whose work makes StringFire sound the way it does.

You download them with your own free TONE3000 account, and each pack keeps its creator's name and licence. We do not bundle or re-host any of it.

Find thousands more at tone3000.com

Download

Get StringFire

One installer contains both plugins and Library Setup. Version 0.9.4.

Windows

Windows 10 or 11, 64-bit · VST3

Available
Download for Windows

Installer, about 4.5 MB. Always the latest version. Direct link to version 0.9.4

macOS

In preparation

Coming soon
Not available yet

The Mac version is being prepared. It will appear here as soon as it has been built and tested on a real Mac.

  1. 1

    Run the installer

    It puts both plugins in the standard VST3 folder, so your DAW finds them without any setup.

  2. 2

    Get the sound library

    Let the installer open Library Setup, choose “Get everything” and sign in to TONE3000 when it asks.

  3. 3

    Rescan and play

    Rescan plugins in your DAW. “StringFire” is under effects, “StringFire Guitar” under instruments.

FAQ

Questions people ask

Is StringFire really free?

Yes. Both plugins are free, with no trial period, no account at Niotik, no ads and no paid version. They are released under the GNU AGPLv3 licence.

Do I need a guitar?

No. StringFire Guitar turns notes from a MIDI keyboard or your piano roll into a guitar performance, and StringFire gives it an amp. If you do play guitar, plug it into your audio interface and use StringFire on that track.

Which DAWs does it work in?

Any DAW that loads VST3 plugins on 64-bit Windows 10 or 11. We develop and test with FL Studio, and every release has to pass the strictest level of the pluginval validator before it goes out.

Why is the sound library a separate download?

The amp captures, cabinets and guitar recordings were made by other people, and we want you to get them from where their authors published them, with their names and licences attached. It also keeps the installer under 5 MB. Library Setup does the downloading for you.

Can I use my own amp captures and cabinets?

Yes. StringFire loads NAM captures (.nam) for the pedal and amp slots and WAV impulse responses for the cabinet. Put a folder of them in Documents\StringFire\amps or Documents\StringFire\cabs and it appears in the plugin.

Windows warns me about the installer. Is that normal?

For now, yes. The installer is not code-signed yet, so Windows SmartScreen may say it does not recognise the publisher. Choose “More info” and then “Run anyway”. Download it only from niotik.com.

When is the macOS version coming?

It is next on the list. The plugins are written to be portable, and the Mac version will be built and tested on a real Mac before we publish it.

Can I release music I made with it?

Yes. What you make with StringFire is yours, commercial releases included.

Go and make some noise.

Two plugins, one small installer, nothing to pay. If it ends up on a record, we would love to hear it.

Download StringFire